Parallel & Ribbon Wire Assemblies / Custom manufacture
XH-Type 2.54 mm Ribbon Cable to PCB Solder Pin Housing
Ribbon cable assemblies with an XH-Type 2.54 housing with socket contacts on one end and a 2.5 mm pitch solder pin housing on the other. The pin end is soldered directly to the PCB, removing the need for a board-side header in permanent board-to-board links.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 26–24 AWG
- UL styles
- UL2651, UL2468
- Colors
- Gray with red edge, white
- Length range
- 60–450 mm
- End A
- XH-Type 2.54 mm latched housing with socket contacts
- End B
- 2.5 mm pitch PCB solder pin housing (SCN type)
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.