Parallel & Ribbon Wire Assemblies / Custom manufacture
SM-Type 2.5 mm 2-Pin Receptacle to Tinned Leads Gray Ribbon Cable
A black two-position latching housing connects to a two-core parallel cable with prepared free ends.
Product Overview
Design requirements for this assembly
Separate conductors for 25 ± 5 mm at each end; no wire or terminal defects.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Connector housing
- SM-Type 2.5 mm 2-pin receptacle housing for pin contacts
- Connector positions
- 2
- Wire style
- UL2651
- Wire gauge (AWG)
- 24
- Wire count
- 2
- Wire colors
- Gray two-core ribbon cable with red edge on conductor 1
- Terminals / contacts
- SM-Type-A / SYP-T, 2 pcs
- Reference length (mm)
- 65 ± 5, housing wire exit to free ends
- Stripping length (mm)
- 6, both ends
- Tinning length (mm)
- 2, tip tinning on both ends
- Housing reference
- SM-2R (SMR-02V-Type receptacle)
- Mates with
- SM-Type 2-pin plug (SMP-02V-Type)
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.