Parallel & Ribbon Wire Assemblies / Custom manufacture
XH-Type 2.54 mm to Pin Header Sleeved Gray Ribbon Cable
Gray flat ribbon cable assemblies protected by a fiberglass sleeve, with an XH-Type 2.54 crimp housing on one end and a 2.5 mm pitch PCB pin header on the other. Built for board-to-board connections inside appliances and control units where the cable needs extra abrasion and heat protection.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 26–24 AWG
- UL styles
- UL2651 (gray flat ribbon, red stripe on pin 1)
- Colors
- Gray with red edge
- Length range
- 70–300 mm
- End A
- XH-Type 2.54 mm (2.5 mm pitch) crimp housing, 4–13 positions
- End B
- 2.5 mm pitch PCB pin header (solder pins)
- Component
- White fiberglass sleeve (1.5 kV) or white/red-stripe varnished fiberglass tube
- Housing reference
- XH-Type 2.54 mm housing / 2.5 mm pitch PCB pin header
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.