Parallel & Ribbon Wire Assemblies / Custom manufacture
XH-Type 2.54 mm Pitch Gray Ribbon Cable Assembly
Gray flat ribbon cable assemblies with XH-Type 2.54 crimp housings, available with same-direction or reverse-direction pinout, a pin header on one end, or tinned leads. Pin 1 is marked by a red edge stripe. Insulation resistance tested at 500 VDC; workmanship to IPC-620 Class II.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 28–24 AWG
- UL styles
- UL2651 (gray flat ribbon, red stripe on pin 1)
- Colors
- Gray with red edge
- Length range
- 60–520 mm
- End A
- XH-Type 2.54 mm (2.5 mm pitch) crimp housing, 2–13 positions
- End B
- XH-Type 2.54 housing (same or reverse direction), pin housing, or tinned leads
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.