Wire Harnesses with Components / Custom manufacture
Wire Harness with Ferrite Core
Wire harnesses with leads wound several turns through a tubular ferrite core to suppress high-frequency noise, helping your product pass EMC testing (CE / FCC).
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 22–18 AWG (0.33–0.82 mm²)
- UL styles
- UL1007, UL1430
- Colors
- Red, black, white, green/yellow
- Length range
- Custom, to drawing
- End A
- 2.5 mm pitch 3-position housing
- End B
- 187 (4.8 mm) flag terminals with silicone boots
- Component
- Tubular ferrite core, leads wound multiple turns (e.g. 3 turns) for EMI suppression
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.