Wire Harnesses with Components / Custom manufacture
NTC Thermistor Wire Harness
Temperature-sensing wire harnesses combining an epoxy-coated NTC thermistor on twin lead wire with power and signal leads in one connector, ready for battery packs and appliances.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 28–22 AWG (0.08–0.33 mm²)
- UL styles
- UL1007, UL1061, UL2651
- Colors
- White, red, blue, black
- Length range
- 38–394 mm
- End A
- 2.0 mm pitch multi-pin housing
- End B
- Stripped and solder-dipped (tinned)
- Component
- Epoxy-coated NTC thermistor, 10 kΩ ±1%, B25/50 = 3435 K ±1% typical; other values to spec
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.