Connector Wire Harnesses / Custom manufacture
PH-Type 2.0 mm 7-Pin to 2.0 mm Pin Housing Fiberglass-Sleeved Wire Harness
Color-coded wire harnesses protected by a white fiberglass sleeve over most of their length, for routing near heat sources or sharp edges inside appliances. A PH-Type 2.0 mm latched housing sits on one end and a 2.0 mm pin housing on the other; both ends leave a short unsleeved section for easy mating.
- Family
- Connector Wire Harnesses
Share your requirements. Suitability is reviewed for each project.
Reference Design Specifications
These specifications describe the displayed assembly, not our factory's capability range. Each order is governed by the drawings confirmed by both parties. Dimensions are in mm unless otherwise stated; wire gauge is AWG. Values are reference design information, not measured or tested results.
- Wire gauge
- 26 AWG
- UL styles
- UL1332
- Colors
- Black, brown, white, yellow, green, blue, red (color-coded)
- Length range
- 300–1000 mm
- End A
- PH-Type 2.0 mm latched crimp housing (PHB type), 7 positions
- End B
- 2.0 mm pitch pin housing (JC20 type), 7 positions
- Component
- White fiberglass sleeve, 1.5 kV
- Housing reference
- PH 2.0 mm 7-position housing / 2.0 mm pitch 7-position pin housing
Continue exploring
Related assemblies.
YOUR NEXT ASSEMBLY STARTS HERE
Discuss your
assembly requirements.
Share the details that define this assembly for your project.